Configure a Receive Location for the CData BizTalk Adapter for Paylocity

You can follow the procedure in this article to connect to Paylocity data, configure a static one-way receive location, and use it to perform a simple test: retrieving Paylocity data and writing it to an XML file.

A receive location can execute SQL commands and create BizTalk messages that contain the results. If you want to execute updategram commands, use a send port.

Create the Receive Port

To add a receive location to your application, you first need to add a receive port. Receive ports can receive data from multiple receive locations.

1. If you have not already done so, open your application in the BizTalk Administration Console.
2. In your application, right-click Receive Ports and click New -> Static One-Way Receive Port. The Receive Port Properties dialog is displayed.
3. In the Name menu, enter a name for the receive port.

Create the Receive Location

After you create the receive port, create the receive location and configure it to use the Paylocity adapter as its transport type.

1. Right-click Receive Locations and click New -> One-Way Receive Location.
2. Select the appropriate receive port of which the new receive location will be a member. The Receive Location Properties dialog is displayed.
3. In the Name menu, enter a name for the receive location.
4. In the Receive Location properties, select CData.Paylocity in the Transport Type menu.
5. In the Receive pipeline menu, select the default option, PassThruReceive.

Configure the Adapter

In the Transport Properties dialog, specify the command that the adapter will execute.

1. In the receive location properties, click Configure. The Transport Properties dialog for the adapter is displayed.
2. In the SQL Command property, enter the command. This example uses SELECT FirstName, LastName FROM Employee WHERE EmployeeId = '1234'

Refer to the "Adapter Configuration" chapter for the available adapter configuration properties.

Configure the Connection String

Set credentials and other connection properties in the Connection String Options dialog.

1. In the receive location properties, click Configure. The adapter properties dialog is displayed.
2. Click the button in the Connection String property.
3. Click the box in the Connection String property. The Connection String Options dialog is displayed.
4. Enter connection properties. Below is a typical connection string: OAuthClientID=YourClientId;OAuthClientSecret=YourClientSecret;RSAPublicKey=YourRSAPubKey;Key=YourKey;IV=YourIV;InitiateOAuth=GETANDREFRESH

   Set the following to establish a connection to Paylocity:

   • RSAPublicKey: Set this to the RSA Key associated with your Paylocity, if the RSA Encryption is enabled in the Paylocity account.

     This property is required for executing Insert and Update statements, and it is not required if the feature is disabled.

   • UseSandbox: Set to true if you are using sandbox account.
   • CustomFieldsCategory: Set this to the Customfields category. This is required when IncludeCustomFields is set to true. The default value for this property is PayrollAndHR.
   • Key: The AES symmetric key(base 64 encoded) encrypted with the Paylocity Public Key. It is the key used to encrypt the content.

     Paylocity will decrypt the AES key using RSA decryption.
     It is an optional property if the IV value not provided, The driver will generate a key internally.

   • IV: The AES IV (base 64 encoded) used when encrypting the content. It is an optional property if the Key value not provided, The driver will generate an IV internally.

   Connect Using OAuth Authentication

   You must use OAuth to authenticate with Paylocity. OAuth requires the authenticating user to interact with Paylocity using the browser. For more information, refer to the OAuth section in the Help documentation.

   The Pay Entry API

   The Pay Entry API is completely separate from the rest of the Paylocity API. It uses a separate Client ID and Secret, and must be explicitly requested from Paylocity for access to be granted for an account. The Pay Entry API allows you to automatically submit payroll information for individual employees, and little else. Due to the extremely limited nature of what is offered by the Pay Entry API, we have elected not to give it a separate schema, but it may be enabled via the UsePayEntryAPI connection property.

   Please be aware that when setting UsePayEntryAPI to true, you may only use the CreatePayEntryImportBatch & MergePayEntryImportBatchgtable stored procedures, the InputTimeEntry table, and the OAuth stored procedures. Attempts to use other features of the product will result in an error. You must also store your OAuthAccessToken separately, which often means setting a different OAuthSettingsLocation when using this connection property.

5. Click Test Connection to verify the connection values and test connectivity.

Refer to the help documentation for a description of the various properties and their functions.

Use a Send Port to Write Data to an XML File

The Static One-Way Receive Location is now ready for use with a send port: A send port must be associated with the BizTalk message that is created by the receive location. To write data to a file, create a file send port.

1. In the BizTalk Administration console, right-click Send Ports -> New -> Static One-Way Send Port.

2. Enter a name for the send port at the top of the configuration window and select FILE from the Type menu.

3. Configure a destination folder; this will be the location where the files are created on disk.

4. For the file name, a macro can be used to easily identify what day the file was created. By default, %MessageId%.xml is used. However, this is not a very user-friendly name, as it is a randomly generated BizTalk Id. To produce a file in the format Employee_yyyy-MM-dd.xml, enter Employee_%Date%.xml.

   Note: For additional information regarding macros, visit the BizTalk Configuration section in the help documentation.

5. Click OK. The URI field should now contain a value.
6. Click Filters in the left-hand side of the configuration screen for the send port.
7. Set the following properties:

   Property: Select "BTS.InboundTransportLocation" from the menu.

   Operator: Select "==" from the menu.

   Value: Enter the URI of the receive location. The URI is shown in the receive location properties.

You can now use the send port to write files that have been sent from the receive location.

Enlist and Enable the Locations and Ports

The final step is to enlist the send port and enable the receive location: Right-click the send port and click Enlist. Then right-click the receive location and click Enable.

Note: Enable the receive location last: This makes sure the file gets picked up for writing by the send port.

Troubleshooting

To check if errors are occurring, expand "Event Viewer (Local)" in the navigation tree in the Administration Console. Expand Windows Logs and click Applications.

The log will include error messages for all applications on the system, so it is important to check that the source of the error message is "CData BizTalk Paylocity Receive Adapter". Details of the error message should provide insight into why the error is occurring. For guidance on resolving the error, contact support@cdata.com.