今すぐお試しください!

製品の詳細CData ODBC Driver for SAP SuccessFactors を確認して、無償評価版をダウンロード:

今すぐダウンロード

Linux/UNIX 上のPython からSAP SuccessFactors Data にデータ連携。

CData ODBC Driver for SAP SuccessFactors を使って、Linux/UNIX 上のPython アプリケーションからSAP SuccessFactors data へのデータ連携が可能になります。Python のpyodbc モジュールを活用しましょう。

豊富なPython のエコシステムでデータ連携が簡単に行えます。 CData Linux/UNIX ODBC Driver for SAP SuccessFactors とpyodbc module を使って、簡単にSAP SuccessFactors に連携するPython アプリケーションが構築できます。本記事では、pyodbc のビルトイン機能を使って、SAP SuccessFactors data に接続し、クエリを実行、表示するかを説明します。

CData ODBC Drivers をUNIX/Linux マシンで利用

The CData ODBC Drivers are supported in various Red Hat-based and Debian-based systems, including Ubuntu, Debian, RHEL, CentOS, and Fedora. There are also several libraries and packages that are required, many of which may be installed by default, depending on your system. For more information on the supported versions of Linux operating systems and the required libraries, please refer to the "Getting Started" section in the help documentation (installed and found online).

Installing the Driver Manager

Before installing the driver, check that your system has a driver manager. For this article, you will use unixODBC, a free and open source ODBC driver manager that is widely supported.

For Debian-based systems like Ubuntu, you can install unixODBC with the APT package manager:

$ sudo apt-get install unixODBC unixODBC-dev

For systems based on Red Hat Linux, you can install unixODBC with yum or dnf:

$ sudo yum install unixODBC unixODBC-devel

The unixODBC driver manager reads information about drivers from an odbcinst.ini file and about data sources from an odbc.ini file. You can determine the location of the configuration files on your system by entering the following command into a terminal:

$ odbcinst -j

The output of the command will display the locations of the configuration files for ODBC data sources and registered ODBC drivers. User data sources can only be accessed by the user account whose home folder the odbc.ini is located in. System data sources can be accessed by all users. Below is an example of the output of this command:

DRIVERS............: /etc/odbcinst.ini SYSTEM DATA SOURCES: /etc/odbc.ini FILE DATA SOURCES..: /etc/ODBCDataSources USER DATA SOURCES..: /home/myuser/.odbc.ini SQLULEN Size.......: 8 SQLLEN Size........: 8 SQLSETPOSIROW Size.: 8

Installing the Driver

You can download the driver in standard package formats: the Debian .deb package format or the .rpm file format. Once you have downloaded the file, you can install the driver from the terminal.

The driver installer registers the driver with unixODBC and creates a system DSN, which can be used later in any tools or applications that support ODBC connectivity.

For Debian-based systems like Ubuntu, run the following command with sudo or as root: $ dpkg -i /path/to/package.deb

For Red Hat systems and other systems that support .rpms, run the following command with sudo or as root: $ rpm -i /path/to/package.rpm

Once the driver is installed, you can list the registered drivers and defined data sources using the unixODBC driver manager:

List the Registered Driver(s)

$ odbcinst -q -d CData ODBC Driver for SAP SuccessFactors ...

List the Defined Data Source(s)

$ odbcinst -q -s CData SAPSuccessFactors Source ...

To use the CData ODBC Driver for SAP SuccessFactors with unixODBC, ensure that the driver is configured to use UTF-16. To do so, edit the INI file for the driver (cdata.odbc.sapsuccessfactors.ini), which can be found in the lib folder in the installation location (typically /opt/cdata/cdata-odbc-driver-for-sapsuccessfactors), as follows:

cdata.odbc.sapsuccessfactors.ini

... [Driver] DriverManagerEncoding = UTF-16

Modifying the DSN

The driver installation predefines a system DSN. You can modify the DSN by editing the system data sources file (/etc/odbc.ini) and defining the required connection properties. Additionally, you can create user-specific DSNs that will not require root access to modify in $HOME/.odbc.ini.

Basic 認証またはOAuth with SAML アサーションを使用して、SAP SuccessFactors に認証できます。

Basic 認証

SAP SuccessFactors に正常に認証するには、次のプロパティの値を指定する必要があります。プロバイダーは、Cookie を使用してSAP SuccessFactors によって開かれたセッションを再利用することに注意してください。つまり、セッションを開く最初のリクエストでのみクレデンシャルが使用されます。その後、SAP SuccessFactors から返されたCookie が認証に使用されます。

  • Url: Success Factors をホストするサーバーのURL に設定。一部のサーバーがリストされています。SAP support documentation(外部リンク)。
  • User: アカウントのユーザー名に設定。
  • Password: アカウントのパスワードに設定。
  • CompanyId: 会社の一意の識別子に設定。

OAuth 認証

アクセストークンを取得するために使用される、次のプロパティの値を指定する必要があります。

  • Url: Success Factors をホストするサーバーのURL に設定。一部のサーバーがリストされています。SAP support documentation(外部リンク)。
  • User: アカウントのユーザー名に設定。
  • CompanyId: 会社の一意の識別子に設定。
  • OAuthClientId: API Center で生成されたAPI Key に設定。
  • OAuthClientSecret: SAML アサーションの署名に使用されるX.509 プライベートキー。プライベートキーは、[Registering your OAuth Client Application]でダウンロードした証明書に記載されています。
  • InitiateOAuth: GETANDREFRESH に設定。

/etc/odbc.ini or $HOME/.odbc.ini

[CData SAPSuccessFactors Source] Driver = CData ODBC Driver for SAP SuccessFactors Description = My Description User = username Password = password CompanyId = CompanyId Url = https://api4.successfactors.com

For specific information on using these configuration files, please refer to the help documentation (installed and found online).

You can follow the procedure below to install pyodbc and start accessing SAP SuccessFactors through Python objects.

pyodbc のインストール

You can use the pip utility to install the module:

pip install pyodbc

Be sure to import with the module with the following:

import pyodbc

Python でのSAP SuccessFactors Data への接続

You can now connect with an ODBC connection string or a DSN. Below is the syntax for a connection string:

cnxn = pyodbc.connect('DRIVER={CData ODBC Driver for SAP SuccessFactors};User=username;Password=password;CompanyId=CompanyId;Url=https://api4.successfactors.com;')

Below is the syntax for a DSN:

cnxn = pyodbc.connect('DSN=CData SAPSuccessFactors Sys;')

Execute SQL to SAP SuccessFactors

Instantiate a Cursor and use the execute method of the Cursor class to execute any SQL statement.

cursor = cnxn.cursor()

Select

You can use fetchall, fetchone, and fetchmany to retrieve Rows returned from SELECT statements:

import pyodbc cursor = cnxn.cursor() cnxn = pyodbc.connect('DSN=CData SAPSuccessFactors Source;User=MyUser;Password=MyPassword') cursor.execute("SELECT address1, zipCode FROM ExtAddressInfo WHERE city = 'Springfield'") rows = cursor.fetchall() for row in rows: print(row.address1, row.zipCode)

You can provide parameterized queries in a sequence or in the argument list:

cursor.execute( "SELECT address1, zipCode FROM ExtAddressInfo WHERE city = ?", 'Springfield',1)

Insert

INSERT commands also use the execute method; however, you must subsequently call the commit method after an insert or you will lose your changes:

cursor.execute("INSERT INTO ExtAddressInfo (city) VALUES ('Springfield')") cnxn.commit()

Update and Delete

As with an insert, you must also call commit after calling execute for an update or delete:

cursor.execute("UPDATE ExtAddressInfo SET city = 'Springfield'") cnxn.commit()

Metadata Discovery

You can use the getinfo method to retrieve data such as information about the data source and the capabilities of the driver. The getinfo method passes through input to the ODBC SQLGetInfo method.

cnxn.getinfo(pyodbc.SQL_DATA_SOURCE_NAME)

You are now ready to build Python apps in Linux/UNIX environments with connectivity to SAP SuccessFactors data, using the CData ODBC Driver for SAP SuccessFactors.

 
 
ダウンロード