今すぐお試しください!

製品の詳細CData ODBC Driver for SQL Analysis Services を確認して、無償評価版をダウンロード:

今すぐダウンロード

Linux/UNIX 上のPython からSQL Analysis Services Data にデータ連携。

CData ODBC Driver for SQL Analysis Services を使って、Linux/UNIX 上のPython アプリケーションからSQL Analysis Services data へのデータ連携が可能になります。Python のpyodbc モジュールを活用しましょう。

豊富なPython のエコシステムでデータ連携が簡単に行えます。 CData Linux/UNIX ODBC Driver for SQL Analysis Services とpyodbc module を使って、簡単にSQL Analysis Services に連携するPython アプリケーションが構築できます。本記事では、pyodbc のビルトイン機能を使って、SQL Analysis Services data に接続し、クエリを実行、表示するかを説明します。

CData ODBC Drivers をUNIX/Linux マシンで利用

The CData ODBC Drivers are supported in various Red Hat-based and Debian-based systems, including Ubuntu, Debian, RHEL, CentOS, and Fedora. There are also several libraries and packages that are required, many of which may be installed by default, depending on your system. For more information on the supported versions of Linux operating systems and the required libraries, please refer to the "Getting Started" section in the help documentation (installed and found online).

Installing the Driver Manager

Before installing the driver, check that your system has a driver manager. For this article, you will use unixODBC, a free and open source ODBC driver manager that is widely supported.

For Debian-based systems like Ubuntu, you can install unixODBC with the APT package manager:

$ sudo apt-get install unixODBC unixODBC-dev

For systems based on Red Hat Linux, you can install unixODBC with yum or dnf:

$ sudo yum install unixODBC unixODBC-devel

The unixODBC driver manager reads information about drivers from an odbcinst.ini file and about data sources from an odbc.ini file. You can determine the location of the configuration files on your system by entering the following command into a terminal:

$ odbcinst -j

The output of the command will display the locations of the configuration files for ODBC data sources and registered ODBC drivers. User data sources can only be accessed by the user account whose home folder the odbc.ini is located in. System data sources can be accessed by all users. Below is an example of the output of this command:

DRIVERS............: /etc/odbcinst.ini SYSTEM DATA SOURCES: /etc/odbc.ini FILE DATA SOURCES..: /etc/ODBCDataSources USER DATA SOURCES..: /home/myuser/.odbc.ini SQLULEN Size.......: 8 SQLLEN Size........: 8 SQLSETPOSIROW Size.: 8

Installing the Driver

You can download the driver in standard package formats: the Debian .deb package format or the .rpm file format. Once you have downloaded the file, you can install the driver from the terminal.

The driver installer registers the driver with unixODBC and creates a system DSN, which can be used later in any tools or applications that support ODBC connectivity.

For Debian-based systems like Ubuntu, run the following command with sudo or as root: $ dpkg -i /path/to/package.deb

For Red Hat systems and other systems that support .rpms, run the following command with sudo or as root: $ rpm -i /path/to/package.rpm

Once the driver is installed, you can list the registered drivers and defined data sources using the unixODBC driver manager:

List the Registered Driver(s)

$ odbcinst -q -d CData ODBC Driver for SQL Analysis Services ...

List the Defined Data Source(s)

$ odbcinst -q -s CData SSAS Source ...

To use the CData ODBC Driver for SQL Analysis Services with unixODBC, ensure that the driver is configured to use UTF-16. To do so, edit the INI file for the driver (cdata.odbc.ssas.ini), which can be found in the lib folder in the installation location (typically /opt/cdata/cdata-odbc-driver-for-ssas), as follows:

cdata.odbc.ssas.ini

... [Driver] DriverManagerEncoding = UTF-16

Modifying the DSN

The driver installation predefines a system DSN. You can modify the DSN by editing the system data sources file (/etc/odbc.ini) and defining the required connection properties. Additionally, you can create user-specific DSNs that will not require root access to modify in $HOME/.odbc.ini.

接続するには、Url プロパティを有効なSQL Server Analysis Services エンドポイントに設定して認証を提供します。XMLA アクセスを使用して、HTTP 経由でホストされているSQL Server Analysis Services インスタンスに接続できます。 Microsoft ドキュメント configure HTTP access を参照してSQL Server Analysis Services に接続してください。

SQL をSQL Server Analysis Services に実行するには、ヘルプドキュメントの「Analysis Services データの取得」を参照してください。接続ごとにメタデータを取得する代わりに、CacheLocation を設定できます。

  • HTTP 認証

    AuthScheme を"Basic" または"Digest" に設定してUser とPassword を設定します。CustomHeaders に他の認証値を指定します。

  • Windows (NTLM)

    Windows のUser とPassword を設定して、AuthScheme をNTLM に設定します。

  • Kerberos およびKerberos Delegation

    Kerberos を認証するには、AuthScheme をNEGOTIATE に設定します。Kerberos 委任を使うには、AuthScheme をKERBEROSDELEGATION に設定します。必要があれば、User、Password およびKerberosSPN を設定します。デフォルトでは、本製品は指定されたUrl でSPN と通信しようと試みます。

  • SSL/TLS:

    デフォルトでは、本製品はサーバーの証明書をシステムの信頼できる証明書ストアと照合してSSL/TLS のネゴシエーションを試みます。別の証明書を指定するには、利用可能なフォーマットについてヘルプドキュメントの「SSLServerCert」プロパティを参照してください。

You can then access any cube as a relational table: When you connect the data provider retrieves SSAS metadata and dynamically updates the table schemas. Instead of retrieving metadata every connection, you can set the CacheLocation property to automatically cache to a simple file-based store.

See the Getting Started section of the CData documentation, under Retrieving Analysis Services Data, to execute SQL-92 queries to the cubes.

/etc/odbc.ini or $HOME/.odbc.ini

[CData SSAS Source] Driver = CData ODBC Driver for SQL Analysis Services Description = My Description User = myuseraccount Password = mypassword URL = http://localhost/OLAP/msmdpump.dll

For specific information on using these configuration files, please refer to the help documentation (installed and found online).

You can follow the procedure below to install pyodbc and start accessing SQL Analysis Services through Python objects.

pyodbc のインストール

You can use the pip utility to install the module:

pip install pyodbc

Be sure to import with the module with the following:

import pyodbc

Python でのSQL Analysis Services Data への接続

You can now connect with an ODBC connection string or a DSN. Below is the syntax for a connection string:

cnxn = pyodbc.connect('DRIVER={CData ODBC Driver for SQL Analysis Services};User=myuseraccount;Password=mypassword;URL=http://localhost/OLAP/msmdpump.dll;')

Below is the syntax for a DSN:

cnxn = pyodbc.connect('DSN=CData SSAS Sys;')

Execute SQL to SQL Analysis Services

Instantiate a Cursor and use the execute method of the Cursor class to execute any SQL statement.

cursor = cnxn.cursor()

Select

You can use fetchall, fetchone, and fetchmany to retrieve Rows returned from SELECT statements:

import pyodbc cursor = cnxn.cursor() cnxn = pyodbc.connect('DSN=CData SSAS Source;User=MyUser;Password=MyPassword') cursor.execute("SELECT Fiscal_Year, Sales_Amount FROM Adventure_Works WHERE Fiscal_Year = 'FY 2008'") rows = cursor.fetchall() for row in rows: print(row.Fiscal_Year, row.Sales_Amount)

You can provide parameterized queries in a sequence or in the argument list:

cursor.execute( "SELECT Fiscal_Year, Sales_Amount FROM Adventure_Works WHERE Fiscal_Year = ?", 'FY 2008',1)

Insert

INSERT commands also use the execute method; however, you must subsequently call the commit method after an insert or you will lose your changes:

cursor.execute("INSERT INTO Adventure_Works (Fiscal_Year) VALUES ('FY 2008')") cnxn.commit()

Update and Delete

As with an insert, you must also call commit after calling execute for an update or delete:

cursor.execute("UPDATE Adventure_Works SET Fiscal_Year = 'FY 2008'") cnxn.commit()

Metadata Discovery

You can use the getinfo method to retrieve data such as information about the data source and the capabilities of the driver. The getinfo method passes through input to the ODBC SQLGetInfo method.

cnxn.getinfo(pyodbc.SQL_DATA_SOURCE_NAME)

You are now ready to build Python apps in Linux/UNIX environments with connectivity to SQL Analysis Services data, using the CData ODBC Driver for SQL Analysis Services.

 
 
ダウンロード