Discover how a bimodal integration strategy can address the major data management challenges facing your organization today.
Get the Report →Work with WooCommerce Data in FoxPro
Load WooCommerce data into a FoxPro database. This article includes full code and a walk-through of the process.
The CData ODBC driver for WooCommerce enables you to access WooCommerce data using the ODBC standard. You can use the CData ODBC Driver for WooCommerce to integrate WooCommerce data into your FoxPro project. The procedure below provides a walk-through of the included code sample, which saves WooCommerce data into tables in a FoxPro database.
Connect to WooCommerce as an ODBC Data Source
If you have not already, first specify connection properties in an ODBC DSN (data source name). This is the last step of the driver installation. You can use the Microsoft ODBC Data Source Administrator to create and configure ODBC DSNs.
NOTE: Set the 'Map To WVarchar' connection property to FALSE (FoxPro uses the ODBC W API and returns the WCHAR for the value type).
WooCommerce supports the following authentication methods: one-legged OAuth1.0 Authentication and standard OAuth2.0 Authentication.
Connecting using one-legged OAuth 1.0 Authentication
Specify the following properties (NOTE: the below credentials are generated from WooCommerce settings page and should not be confused with the credentials generated by using WordPress OAuth2.0 plugin):
- ConsumerKey
- ConsumerSecret
Connecting using WordPress OAuth 2.0 Authentication
After having configured the plugin, you may connect to WooCommerce by providing the following connection properties:
In either case, you will need to set the Url property to the URL of the WooCommerce instance.
To get started, add the code sample to a new project. You can execute the following command to save all tables without displaying them:
Below is the process that the program follows:
Open a connection to WooCommerce data with the line below: If the connection was successful, you can now retrieve the list of tables using the SQLTABLES function. The code below saves the list of tables in sys_tables.dbf:
Below is the full code, in FoxPro 9 syntax:
Connect and Transfer
DO C:\Temp\sqldump.prg WITH "CData WooCommerce Source", "TESTDB", .f.
m.hSQLconnection = SQLCONNECT(m.cODBCDSN)
WAIT WINDOW "Fetching tables for data source '" + m.cODBCDSN + "'..." NOWAIT NOCLEAR
m.nSQLTABLES = SQLTABLES(m.hSQLconnection)
IF lUseDistinctConnections
WAIT WINDOW "Closing ODBC Connection for data source '" + m.cODBCDSN + "'..." NOWAIT NOCLEAR
SQLDISCONNECT(m.hSQLconnection)
m.hSQLconnection = 0 * SQLCONNECT needs to be called again
ENDIF
IF m.nSQLTABLES > 0
* create local table containing list of tables in db
COPY TO (m.cImportData + "sys_tables")
USE
* convert each table to DBF
USE (m.cImportData + "sys_tables")
ALTER TABLE DBF("sys_tables") ;
ADD COLUMN records i ;
ADD COLUMN dbfname m
FUNCTION ODBCtoDBF (cTableName as String, cTableType as String, lBrowse as Logical, lhSQLConnection as Integer)
WAIT WINDOW ;
"Converting " + m.cTableType + ' "' + m.cTableName + '" to DBF...' ;
NOWAIT NOCLEAR
ACTIVATE SCREEN
* strip characters incompatible with FoxPro out of the name of the DBF file
m.cTableAlias = ""
m.nTableNameLen = LEN(m.cTableName)
m.nTableNameStart = 1
FOR m.nTableNameStart = 1 TO m.nTableNameLen
m.cCharacter = SUBSTR(m.cTableName, m.nTableNameStart, 1)
IF !ISALPHA(m.cCharacter) .and. (m.nTableNameStart = 1 .or. !ISDIGIT(m.cCharacter))
m.cTableAlias = m.cTableAlias + "_"
ELSE
m.cTableAlias = m.cTableAlias + m.cCharacter
ENDIF
ENDFOR
m.cFromTable = m.cTableName
m.cTempViewAlias = m.cTableType + "_" + m.cTableAlias
LOCAL loException as Exception
LOCAL lnResultSets
TRY
* run query
m.lnResultSets = SQLEXEC(m.lhSQLConnection, ;
"SELECT * FROM " + m.cFromTable, ;
m.cTempViewAlias, ;
aSQLResult)
IF m.lnResultSets#1
SET STEP ON
ENDIF
ACTIVATE SCREEN
CATCH TO m.loException
ACTIVATE SCREEN
? "Error opening " + m.cTempViewAlias + ":"
? m.loException.Message
? m.loException.Details
ENDTRY
IF !USED(m.cTempViewAlias)
RETURN
ENDIF
* copy records from view cursor to disk
SELECT * FROM (m.cTempViewAlias) ;
INTO TABLE (m.cImportData + m.cTableAlias)
IF USED(m.cTableAlias)
ACTIVATE SCREEN
FLUSH && flush the buffer to write the data to disk
IF m.lBrowse
* pop the table up on screen
SELECT (m.cTableAlias)
BROWSE NORMAL NOMODIFY NOWAIT
ACTIVATE SCREEN
ELSE
* close on-disk table for now
USE IN (m.cTableAlias)
ACTIVATE SCREEN
ENDIF
ENDIF
IF USED(m.cTempViewAlias)
USE IN &cTempViewAlias && close SQL view
ACTIVATE SCREEN
ENDIF
WAIT CLEAR
ENDFUNC
PARAMETERS cODBCDSN, cDatabaseName, lBrowseAfterConvert
* cODBCDSN The ODBC data source name, used for the name of the folder where the DBF tables are stored.
* cDatabaseName The name of the FoxPro database to use. This database is created if it does not exist. The default is DATABASE_NAME.
*
* lBrowseAfterConvert If ".t." display each table with the BROWSE command after importing it. If ".f." close each table before moving on to the next one.
#define ODBC_DATASOURCE "DataSourceName"
#define DATABASE_NAME "odbcdata"
m.m_tpath = ".\" && root directory for data
ON ERROR
SET SAFETY OFF
IF VARTYPE(m.cODBCDSN)#"C" .or. EMPTY(m.cODBCDSN)
m.cODBCDSN = ODBC_DATASOURCE
ENDIF
IF VARTYPE(m.cDatabaseName)#"C" .or. EMPTY(m.cDatabaseName)
m.cDatabaseName = DATABASE_NAME
ENDIF
m.cImportData = m.cODBCDSN + "\"
CLOSE TABLES ALL
CLOSE DATABASES ALL
IF !DIRECTORY(m.cImportData)
MKDIR (m.cImportData)
ENDIF
CREATE DATABASE (m.cDatabaseName)
CREATE CONNECTION (m.cDatabaseName) DATASOURCE (m.cODBCDSN) DATABASE (m.cDatabaseName)
WAIT WINDOW "Opening ODBC Connection for data source '" + m.cODBCDSN + "'..." NOWAIT NOCLEAR
m.hSQLconnection = SQLCONNECT(m.cODBCDSN)
IF m.hSQLconnection > 0
* Connection successful; get list of tables
WAIT WINDOW "Fetching tables for data source '" + m.cODBCDSN + "'..." NOWAIT NOCLEAR
m.nSQLTABLES = SQLTABLES(m.hSQLconnection)
IF m.nSQLTABLES > 0
* Create local table containing list of tables in db
COPY TO (m.cImportData + "sys_tables")
USE
* Convert each table to DBF
USE (m.cImportData + "sys_tables")
ALTER TABLE DBF("sys_tables") ;
ADD COLUMN records i ;
ADD COLUMN dbfname m
SCAN
m.cCurrentTable = TRIM(sys_tables.table_name)
m.cCurrentTableType = TRIM(sys_tables.table_type) && Valid values are "SYSTEMTABLE", "TABLE", and "VIEW".
IF m.cCurrentTableType = "TABLE" or m.cCurrentTableType = "VIEW"
ODBCtoDBF(m.cCurrentTable, m.cCurrentTableType, m.lBrowseAfterConvert, m.hSQLConnection)
ELSE
ACTIVATE SCREEN
? "ERROR:", m.cCurrentTable, "Couldn't open ODBC connection."
=MESSAGEBOX("couldn't open data source " + m.cODBCDSN + " for table " + m.cCurrentTable + ".")
ENDIF
ENDSCAN
BROWSE NORMAL NOWAIT
ELSE
=MESSAGEBOX("No tables found in data source " + m.cODBCDSN + ".")
SET STEP ON
ENDIF
SQLDISCONNECT(m.hSQLconnection)
ELSE
=MESSAGEBOX("Could not open data source " + m.cODBCDSN + ".")
SET STEP ON
ENDIF
FUNCTION ODBCtoDBF (cTableName as String, cTableType as String, lBrowse as Logical, lhSQLConnection as Integer)
WAIT WINDOW ;
"Converting " + m.cTableType + ' "' + m.cTableName + '" to DBF...' ;
NOWAIT NOCLEAR
ACTIVATE SCREEN
* Strip characters incompatible with FoxPro out of the name of the DBF file
m.cTableAlias = ""
m.nTableNameLen = LEN(m.cTableName)
m.nTableNameStart = 1
FOR m.nTableNameStart = 1 TO m.nTableNameLen
m.cCharacter = SUBSTR(m.cTableName, m.nTableNameStart, 1)
IF !ISALPHA(m.cCharacter) .and. (m.nTableNameStart = 1 .or. !ISDIGIT(m.cCharacter))
m.cTableAlias = m.cTableAlias + "_"
ELSE
m.cTableAlias = m.cTableAlias + m.cCharacter
ENDIF
ENDFOR
m.cFromTable = m.cTableName
m.cTempViewAlias = m.cTableType + "_" + m.cTableAlias
LOCAL loException as Exception
LOCAL lnResultSets
TRY
* Run query
m.lnResultSets = SQLEXEC(m.lhSQLConnection, ;
"SELECT * FROM " + m.cFromTable, ;
m.cTempViewAlias, ;
aSQLResult)
IF m.lnResultSets#1
SET STEP ON
ENDIF
ACTIVATE SCREEN
CATCH TO m.loException
ACTIVATE SCREEN
? "Error opening " + m.cTempViewAlias + ":"
? m.loException.Message
? m.loException.Details
ENDTRY
IF !USED(m.cTempViewAlias)
RETURN
ENDIF
* Copy records from view cursor to disk
SELECT * FROM (m.cTempViewAlias) ;
INTO TABLE (m.cImportData + m.cTableAlias)
IF USED(m.cTableAlias)
ACTIVATE SCREEN
FLUSH && Flush the buffer to write the data to disk
IF m.lBrowse
* Display the table on screen
SELECT (m.cTableAlias)
BROWSE NORMAL NOMODIFY NOWAIT
ACTIVATE SCREEN
ELSE
* Close on-disk table
USE IN (m.cTableAlias)
ACTIVATE SCREEN
ENDIF
ENDIF
IF USED(m.cTempViewAlias)
USE IN &cTempViewAlias && Close SQL view
ACTIVATE SCREEN
ENDIF
WAIT CLEAR
ENDFUNC