Ready to get started?

Download a free trial of the Xero ODBC Driver to get started:

Learn more:

The Xero ODBC Driver is a powerful tool that allows you to connect with live data from Xero accounting software , directly from any applications that support ODBC connectivity.

Access Xero data like you would a database - read, write, and update Xero Customers, Transactions, Invoices, Sales Receipts, etc. through a standard ODBC Driver interface.

Work with Xero Data in FoxPro

Load Xero data into a FoxPro database. This article includes full code and a walk-through of the process.

The CData ODBC Driver for Xero enables you to access Xero data using the ODBC standard. You can use the CData ODBC Driver for Xero to integrate Xero data into your FoxPro project. The procedure below provides a walk-through of the included code sample, which saves Xero data into tables in a FoxPro database.

Connect to Xero as an ODBC Data Source

If you have not already, first specify connection properties in an ODBC DSN (data source name). This is the last step of the driver installation. You can use the Microsoft ODBC Data Source Administrator to create and configure ODBC DSNs.

NOTE: Set the 'Map To WVarchar' connection property to FALSE (FoxPro uses the ODBC W API and returns the WCHAR for the value type).

To connect, set the Schema connection property in addition to any authentication values. Xero offers authentication for private applications, public applications, and partner applications. You will need to set the XeroAppAuthentication property to PUBLIC, PRIVATE, or PARTNER, depending on the type of application configured. To connect from a private application, you will additionally need to set the OAuthAccessToken, OAuthClientId, OAuthClientSecret, CertificateStoreType, CertificateStore, and CertificateStorePassword.

To connect from a public or partner application, you can use the embedded OAuthClientId, OAuthClientSecret, and CallbackURL, or you can register an app to obtain your own OAuth values.

See the "Getting Started" chapter of the help documentation for a guide to authenticating to Xero.

Connect and Transfer

To get started, add the code sample to a new project. You can execute the following command to save all tables without displaying them:

DO C:\Temp\sqldump.prg WITH "CData Xero Source", "TESTDB", .f.

Below is the process that the program follows:

Create a new FoxPro database.
Open a connection to Xero data with the line below:
m.hSQLconnection = SQLCONNECT(m.cODBCDSN)
If the connection was successful, you can now retrieve the list of tables using the SQLTABLES function. The code below saves the list of tables in sys_tables.dbf:
WAIT WINDOW "Fetching tables for data source '" + m.cODBCDSN + "'..." NOWAIT NOCLEAR m.nSQLTABLES = SQLTABLES(m.hSQLconnection) IF lUseDistinctConnections WAIT WINDOW "Closing ODBC Connection for data source '" + m.cODBCDSN + "'..." NOWAIT NOCLEAR SQLDISCONNECT(m.hSQLconnection) m.hSQLconnection = 0 * SQLCONNECT needs to be called again ENDIF IF m.nSQLTABLES > 0 * create local table containing list of tables in db COPY TO (m.cImportData + "sys_tables") USE * convert each table to DBF USE (m.cImportData + "sys_tables") ALTER TABLE DBF("sys_tables") ; ADD COLUMN records i ; ADD COLUMN dbfname m
Scan over each table, saving it to a DBF file. The function ODBCtoDBF stores the table in a DBF file and then opens a grid if the lBrowse parameter is set to true: FUNCTION ODBCtoDBF (cTableName as String, cTableType as String, lBrowse as Logical, lhSQLConnection as Integer) WAIT WINDOW ; "Converting " + m.cTableType + ' "' + m.cTableName + '" to DBF...' ; NOWAIT NOCLEAR ACTIVATE SCREEN * strip characters incompatible with FoxPro out of the name of the DBF file m.cTableAlias = "" m.nTableNameLen = LEN(m.cTableName) m.nTableNameStart = 1 FOR m.nTableNameStart = 1 TO m.nTableNameLen m.cCharacter = SUBSTR(m.cTableName, m.nTableNameStart, 1) IF !ISALPHA(m.cCharacter) .and. (m.nTableNameStart = 1 .or. !ISDIGIT(m.cCharacter)) m.cTableAlias = m.cTableAlias + "_" ELSE m.cTableAlias = m.cTableAlias + m.cCharacter ENDIF ENDFOR m.cFromTable = m.cTableName m.cTempViewAlias = m.cTableType + "_" + m.cTableAlias LOCAL loException as Exception LOCAL lnResultSets TRY * run query m.lnResultSets = SQLEXEC(m.lhSQLConnection, ; "SELECT * FROM " + m.cFromTable, ; m.cTempViewAlias, ; aSQLResult) IF m.lnResultSets#1 SET STEP ON ENDIF ACTIVATE SCREEN CATCH TO m.loException ACTIVATE SCREEN ? "Error opening " + m.cTempViewAlias + ":" ? m.loException.Message ? m.loException.Details ENDTRY IF !USED(m.cTempViewAlias) RETURN ENDIF * copy records from view cursor to disk SELECT * FROM (m.cTempViewAlias) ; INTO TABLE (m.cImportData + m.cTableAlias) IF USED(m.cTableAlias) ACTIVATE SCREEN FLUSH && flush the buffer to write the data to disk IF m.lBrowse * pop the table up on screen SELECT (m.cTableAlias) BROWSE NORMAL NOMODIFY NOWAIT ACTIVATE SCREEN ELSE * close on-disk table for now USE IN (m.cTableAlias) ACTIVATE SCREEN ENDIF ENDIF IF USED(m.cTempViewAlias) USE IN &cTempViewAlias && close SQL view ACTIVATE SCREEN ENDIF WAIT CLEAR ENDFUNC
You can now save tables of Xero data as DBF files.

Below is the full code, in FoxPro 9 syntax:


PARAMETERS cODBCDSN, cDatabaseName, lBrowseAfterConvert

*	cODBCDSN				The ODBC data source name, used for the name of the folder where the DBF tables are stored.
*	cDatabaseName			The name of the FoxPro database to use. This database is created if it does not exist. The default is DATABASE_NAME.
*								
*	lBrowseAfterConvert		If ".t." display each table with the BROWSE command after importing it. If ".f." close each table before moving on to the next one.

#define		ODBC_DATASOURCE		"DataSourceName"
#define		DATABASE_NAME		"odbcdata"

m.m_tpath = ".\"                && root directory for data

ON ERROR
SET SAFETY OFF

IF VARTYPE(m.cODBCDSN)#"C" .or. EMPTY(m.cODBCDSN)
  m.cODBCDSN = ODBC_DATASOURCE
ENDIF
IF VARTYPE(m.cDatabaseName)#"C" .or. EMPTY(m.cDatabaseName)
  m.cDatabaseName = DATABASE_NAME
ENDIF

m.cImportData = m.cODBCDSN + "\"

CLOSE TABLES ALL
CLOSE DATABASES ALL

IF !DIRECTORY(m.cImportData)
	MKDIR (m.cImportData)
ENDIF

CREATE DATABASE (m.cDatabaseName)
CREATE CONNECTION (m.cDatabaseName) DATASOURCE (m.cODBCDSN) DATABASE (m.cDatabaseName)

WAIT WINDOW "Opening ODBC Connection for data source '" + m.cODBCDSN + "'..." NOWAIT NOCLEAR
m.hSQLconnection = SQLCONNECT(m.cODBCDSN)

IF m.hSQLconnection > 0
  * Connection successful; get list of tables
  WAIT WINDOW "Fetching tables for data source '" + m.cODBCDSN + "'..." NOWAIT NOCLEAR
  m.nSQLTABLES = SQLTABLES(m.hSQLconnection)

  IF m.nSQLTABLES > 0
    * Create local table containing list of tables in db
    COPY TO (m.cImportData + "sys_tables")
    USE

    * Convert each table to DBF
    USE (m.cImportData + "sys_tables")
    ALTER TABLE DBF("sys_tables") ;
    ADD COLUMN records	i ;
    ADD COLUMN dbfname	m

    SCAN	
    m.cCurrentTable	= TRIM(sys_tables.table_name)
    m.cCurrentTableType	= TRIM(sys_tables.table_type) && Valid values are "SYSTEMTABLE", "TABLE", and "VIEW".
    IF m.cCurrentTableType = "TABLE" or m.cCurrentTableType = "VIEW"

      ODBCtoDBF(m.cCurrentTable, m.cCurrentTableType, m.lBrowseAfterConvert, m.hSQLConnection)
    ELSE
      ACTIVATE SCREEN
      ? "ERROR:", m.cCurrentTable, "Couldn't open ODBC connection."
      =MESSAGEBOX("couldn't open data source " + m.cODBCDSN + " for table " + m.cCurrentTable + ".")
    ENDIF

    ENDSCAN
    BROWSE NORMAL NOWAIT

  ELSE
    =MESSAGEBOX("No tables found in data source " + m.cODBCDSN + ".")
    SET STEP ON
  ENDIF
  
  SQLDISCONNECT(m.hSQLconnection)
  
ELSE
  =MESSAGEBOX("Could not open data source " + m.cODBCDSN + ".")
  SET STEP ON
ENDIF

FUNCTION ODBCtoDBF (cTableName as String, cTableType as String, lBrowse as Logical, lhSQLConnection as Integer)

  WAIT WINDOW ;
  "Converting " + m.cTableType + ' "' + m.cTableName + '" to DBF...' ;
  NOWAIT NOCLEAR

  ACTIVATE SCREEN

  * Strip characters incompatible with FoxPro out of the name of the DBF file
  m.cTableAlias		= ""
  m.nTableNameLen		= LEN(m.cTableName)
  m.nTableNameStart	= 1
  
  FOR m.nTableNameStart = 1 TO m.nTableNameLen
    m.cCharacter = SUBSTR(m.cTableName, m.nTableNameStart, 1)	
    IF !ISALPHA(m.cCharacter) .and. (m.nTableNameStart = 1 .or. !ISDIGIT(m.cCharacter))
      m.cTableAlias = m.cTableAlias + "_"
    ELSE
      m.cTableAlias = m.cTableAlias + m.cCharacter
    ENDIF
  ENDFOR

  m.cFromTable = m.cTableName
  m.cTempViewAlias	= m.cTableType + "_" + m.cTableAlias

  LOCAL loException as Exception
  LOCAL lnResultSets
  
  TRY
    * Run query
    m.lnResultSets = SQLEXEC(m.lhSQLConnection, ;
      "SELECT * FROM " + m.cFromTable, ;
      m.cTempViewAlias, ;
      aSQLResult)
	  
    IF m.lnResultSets#1
      SET STEP ON
    ENDIF
	
    ACTIVATE SCREEN

  CATCH TO m.loException
    ACTIVATE SCREEN
    ? "Error opening " + m.cTempViewAlias + ":"
    ? m.loException.Message
    ? m.loException.Details
  ENDTRY

  IF !USED(m.cTempViewAlias)
    RETURN
  ENDIF

  * Copy records from view cursor to disk
  SELECT * FROM (m.cTempViewAlias) ;
    INTO TABLE (m.cImportData + m.cTableAlias)

  IF USED(m.cTableAlias)

    ACTIVATE SCREEN

    FLUSH	&& Flush the buffer to write the data to disk

    IF m.lBrowse
      * Display the table on screen
      SELECT (m.cTableAlias)
      BROWSE NORMAL NOMODIFY NOWAIT
      ACTIVATE SCREEN
    ELSE
      * Close on-disk table
      USE IN (m.cTableAlias)
      ACTIVATE SCREEN
    ENDIF
  ENDIF

  IF USED(m.cTempViewAlias)
    USE IN &cTempViewAlias && Close SQL view
    ACTIVATE SCREEN
  ENDIF

  WAIT CLEAR

ENDFUNC

CData Software is a leading provider of data access and connectivity solutions. Our standards-based connectors streamline data access and insulate customers from the complexities of integrating with on-premise or cloud databases, SaaS, APIs, NoSQL, and Big Data.

Connect With Us

Get Started

Data Connectors

ETL/ ELT Solutions

Cloud & API Connectivity

OEM & Custom Drivers

Connect With Us

Get Started

Data Visualization

Company

Resources

Ready to get started?

In this article

Related articles

Work with Xero Data in FoxPro

Connect to Xero as an ODBC Data Source

Connect and Transfer