Discover how a bimodal integration strategy can address the major data management challenges facing your organization today.
Get the Report →How to Connect to Typeform Data in Using Python: 6 Steps
Create Python applications on Linux/UNIX machines with connectivity to Typeform data. Leverage the pyodbc module for ODBC in Python.
The rich ecosystem of Python modules lets you get to work quicker and integrate your systems more effectively. With the CData Linux/UNIX ODBC Driver for Typeform and the pyodbc module, you can easily build Typeform-connected Python applications. This article shows how to use the pyodbc built-in functions to connect to Typeform data, execute queries, and output the results.
How to Use the CData ODBC Drivers on UNIX/Linux
The CData ODBC Drivers are supported in various Red Hat-based and Debian-based systems, including Ubuntu, Debian, RHEL, CentOS, and Fedora. There are also several libraries and packages that are required, many of which may be installed by default, depending on your system. For more information on the supported versions of Linux operating systems and the required libraries, please refer to the "Getting Started" section in the help documentation (installed and found online).
1. Install the Driver Manager
Before installing the driver, check that your system has a driver manager. For this article, you will use unixODBC, a free and open source ODBC driver manager that is widely supported.
For Debian-based systems like Ubuntu, you can install unixODBC with the APT package manager:
$ sudo apt-get install unixodbc unixodbc-dev
For systems based on Red Hat Linux, you can install unixODBC with yum or dnf:
$ sudo yum install unixODBC unixODBC-devel
The unixODBC driver manager reads information about drivers from an odbcinst.ini file and about data sources from an odbc.ini file. You can determine the location of the configuration files on your system by entering the following command into a terminal:
$ odbcinst -j
The output of the command will display the locations of the configuration files for ODBC data sources and registered ODBC drivers. User data sources can only be accessed by the user account whose home folder the odbc.ini is located in. System data sources can be accessed by all users. Below is an example of the output of this command:
DRIVERS............: /etc/odbcinst.ini
SYSTEM DATA SOURCES: /etc/odbc.ini
FILE DATA SOURCES..: /etc/ODBCDataSources
USER DATA SOURCES..: /home/myuser/.odbc.ini
SQLULEN Size.......: 8
SQLLEN Size........: 8
SQLSETPOSIROW Size.: 8
2. Install the Driver
You can download the driver in standard package formats: the Debian .deb package format or the .rpm file format. Once you have downloaded the file, you can install the driver from the terminal.
The driver installer registers the driver with unixODBC and creates a system DSN, which can be used later in any tools or applications that support ODBC connectivity.
For Debian-based systems like Ubuntu, run the following command with sudo or as root:
$ dpkg -i /path/to/package.deb
For Red Hat systems and other systems that support .rpms, run the following command with sudo or as root:
$ rpm -i /path/to/package.rpm
Once the driver is installed, you can list the registered drivers and defined data sources using the unixODBC driver manager:
List the Registered Driver(s)
$ odbcinst -q -d
CData API Driver for ODBC
...
List the Defined Data Source(s)
$ odbcinst -q -s
CData API Source
...
To use the CData API Driver for ODBC with unixODBC, ensure that the driver is configured to use UTF-16. To do so, edit the INI file for the driver (cdata.odbc.api.ini), which can be found in the lib folder in the installation location (typically /opt/cdata/cdata-odbc-driver-for-api), as follows:
cdata.odbc.api.ini
...
[Driver]
DriverManagerEncoding = UTF-16
3. Modify the DSN
The driver installation predefines a system DSN. You can modify the DSN by editing the system data sources file (/etc/odbc.ini) and defining the required connection properties. Additionally, you can create user-specific DSNs that will not require root access to modify in $HOME/.odbc.ini.
Start by setting the Profile connection property to the location of the TypeForm Profile on disk (e.g. C:\profiles\TypeForm.apip). Next, set the ProfileSettings connection property to the connection string for TypeForm (see below).
TypeForm API Profile Settings
Authentication to TypeForm uses the OAuth standard.
To authenticate to TypeForm, you must first register and configure an OAuth application with TypeForm here: https://admin.typeform.com/account#/section/tokens. Your app will be assigned a client ID and a client secret which can be set in the connection string. More information on setting up an OAuth application can be found at https://developer.typeform.com/get-started/.
Note that there are several different use scenarios which all require different redirect URIs:
- CData Desktop Applications: CData desktop applications (Sync, API Server, ArcESB) accept OAuth tokens at /src/oauthCallback.rst. The host and port is the same as the default port used by the application. For example, if you use http://localhost:8019/ to access CData Sync then the redirect URI will be http://localhost:8019/src/oauthCallback.rst.
- CData Cloud Applications: CData cloud applications are similar to their desktop counterparts. If you access Connect Cloud at https://1.2.3.4/ then you should use the redirect https://1.2.3.4/src/oauthCallback.rst.
- Desktop Application: When using a desktop application, the URI https://localhost:33333 is recommended.
- Web Application: When developing a web application using the driver, use your own URI here such as https://my-website.com/oauth.
After setting the following connection properties, you are ready to connect:
- AuthScheme: Set this to OAuth.
- InitiateOAuth: Set this to GETANDREFRESH. You can use InitiateOAuth to manage the process to obtain the OAuthAccessToken.
- OAuthClientId: Set this to the Client Id that is specified in your app settings.
- OAuthClientSecret: Set this to Client Secret that is specified in your app settings.
- CallbackURL: Set this to the Redirect URI you specified in your app settings.
/etc/odbc.ini or $HOME/.odbc.ini
[CData API Source]
Driver = CData API Driver for ODBC
Description = My Description
Profile = C:\profiles\TypeForm.apip
Authscheme = OAuth
OAuthClientId = your_client_id
OAuthClientSecret = your_client_secret
CallbackUrl = your_callback_url
For specific information on using these configuration files, please refer to the help documentation (installed and found online).
You can follow the procedure below to install pyodbc and start accessing Typeform through Python objects.
4. Install pyodbc
You can use the pip utility to install the module:
pip install pyodbc
Be sure to import with the module with the following:
import pyodbc
5. Connect to Typeform Data
You can now connect with an ODBC connection string or a DSN. Below is the syntax for a connection string:
cnxn = pyodbc.connect('DRIVER={CData API Driver for ODBC};Profile=C:\profiles\TypeForm.apip;Authscheme=OAuth;OAuthClientId=your_client_id;OAuthClientSecret=your_client_secret;CallbackUrl=your_callback_url;')
Below is the syntax for a DSN:
cnxn = pyodbc.connect('DSN=CData API Sys;')
6. Execute SQL on Typeform
Instantiate a Cursor and use the execute method of the Cursor class to execute any SQL statement.
cursor = cnxn.cursor()
Select
You can use fetchall, fetchone, and fetchmany to retrieve Rows returned from SELECT statements:
import pyodbc
cursor = cnxn.cursor()
cnxn = pyodbc.connect('DSN=CData API Source;User=MyUser;Password=MyPassword')
cursor.execute("SELECT Id, Title FROM Tags WHERE SettingsIsPublic = 'true'")
rows = cursor.fetchall()
for row in rows:
print(row.Id, row.Title)
You can provide parameterized queries in a sequence or in the argument list:
cursor.execute(
"SELECT Id, Title
FROM Tags
WHERE SettingsIsPublic = ?", 'true',1)
Metadata Discovery
You can use the getinfo method to retrieve data such as information about the data source and the capabilities of the driver. The getinfo method passes through input to the ODBC SQLGetInfo method.
cnxn.getinfo(pyodbc.SQL_DATA_SOURCE_NAME)
You are now ready to build Python apps in Linux/UNIX environments with connectivity to Typeform data, using the CData API Driver for ODBC.