Learn more
 

Ready to get started?

Download a free trial of the Workday ODBC Driver to get started:

 Download Now

Learn more:

Workday Icon Workday ODBC Driver

The Workday ODBC Driver is a powerful tool that allows you to connect with live data from Workday, directly from any applications that support ODBC connectivity.

Access Workday data like you would a database - read, write, and update Workday Cash Management, Compensation, Financial Management, Payroll, etc. through a standard ODBC Driver interface.

In this article

Related articles

Natively Connect to Workday Data in PHP


Create PHP applications on Linux/UNIX machines with connectivity to Workday data. Leverage the native support for ODBC in PHP.

Drop the CData ODBC Driver for Workday into your LAMP or WAMP stack to build Workday-connected Web applications. This article shows how to use PHP's ODBC built-in functions to connect to Workday data, execute queries, and output the results.

Using the CData ODBC Drivers on a UNIX/Linux Machine

The CData ODBC Drivers are supported in various Red Hat-based and Debian-based systems, including Ubuntu, Debian, RHEL, CentOS, and Fedora. There are also several libraries and packages that are required, many of which may be installed by default, depending on your system. For more information on the supported versions of Linux operating systems and the required libraries, please refer to the "Getting Started" section in the help documentation (installed and found online).

Installing the Driver Manager

Before installing the driver, check that your system has a driver manager. For this article, you will use unixODBC, a free and open source ODBC driver manager that is widely supported.

For Debian-based systems like Ubuntu, you can install unixODBC with the APT package manager:

$ sudo apt-get install unixodbc unixodbc-dev

For systems based on Red Hat Linux, you can install unixODBC with yum or dnf:

$ sudo yum install unixODBC unixODBC-devel

The unixODBC driver manager reads information about drivers from an odbcinst.ini file and about data sources from an odbc.ini file. You can determine the location of the configuration files on your system by entering the following command into a terminal:

$ odbcinst -j

The output of the command will display the locations of the configuration files for ODBC data sources and registered ODBC drivers. User data sources can only be accessed by the user account whose home folder the odbc.ini is located in. System data sources can be accessed by all users. Below is an example of the output of this command:

DRIVERS............: /etc/odbcinst.ini SYSTEM DATA SOURCES: /etc/odbc.ini FILE DATA SOURCES..: /etc/ODBCDataSources USER DATA SOURCES..: /home/myuser/.odbc.ini SQLULEN Size.......: 8 SQLLEN Size........: 8 SQLSETPOSIROW Size.: 8

Installing the Driver

You can download the driver in standard package formats: the Debian .deb package format or the .rpm file format. Once you have downloaded the file, you can install the driver from the terminal.

The driver installer registers the driver with unixODBC and creates a system DSN, which can be used later in any tools or applications that support ODBC connectivity.

For Debian-based systems like Ubuntu, run the following command with sudo or as root: $ dpkg -i /path/to/package.deb

For Red Hat systems or other systems that support .rpms, run the following command with sudo or as root: $ rpm -i /path/to/package.rpm

Once the driver is installed, you can list the registered drivers and defined data sources using the unixODBC driver manager:

List the Registered Driver(s)

$ odbcinst -q -d CData ODBC Driver for Workday ...

List the Defined Data Source(s)

$ odbcinst -q -s CData Workday Source ...

To use the CData ODBC Driver for Workday with unixODBC, ensure that the driver is configured to use UTF-16. To do so, edit the INI file for the driver (cdata.odbc.workday.ini), which can be found in the lib folder in the installation location (typically /opt/cdata/cdata-odbc-driver-for-workday), as follows:

cdata.odbc.workday.ini

... [Driver] DriverManagerEncoding = UTF-16

Modifying the DSN

The driver installation predefines a system DSN. You can modify the DSN by editing the system data sources file (/etc/odbc.ini) and defining the required connection properties. Additionally, you can create user-specific DSNs that will not require root access to modify in $HOME/.odbc.ini.

To connect, there are three pieces of information required: Authentication, API URL, and WSDL URL.

Authentication

To authenticate, specify your User and Password. Note that you must append your Tenant to your User separated by an '@' character. For instance, if you normally log in with 'geraldg' and your Tenant is 'mycompany_mc1', then your User should be specified as 'geraldg@mycompany_mc1'.

API URL

The API URL may be specified either directly via APIURL, or it may be constructed from the Tenant, Service, and Host. The APIURL is constructed in the following format: <Host>/ccx/service/<Tenant>/<Service>.

WSDL URL

The WSDLURL may be specified in its entirety, or may be constructed from the Service and WSDLVersion connection properties. The WSDLURL is constructed in the following format: https://community.workday.com/sites/default/files/file-hosting/productionapi/<Service>/<WSDLVersion>/<Service>.wsdl

/etc/odbc.ini or $HOME/.odbc.ini

[CData Workday Source] Driver = CData ODBC Driver for Workday Description = My Description User = myuser Password = mypassword Tenant = mycompany_gm1 Host = https://wd3-impl-services1.workday.com

For specific information on using these configuration files, please refer to the help documentation (installed and found online).

Establish a Connection

Open the connection to Workday by calling the odbc_connect or odbc_pconnect methods. To close connections, use odbc_close or odbc_close_all.

$conn = odbc_connect("CData ODBC Workday Source","user","password");

Connections opened with odbc_connect are closed when the script ends. Connections opened with the odbc_pconnect method are still open after the script ends. This enables other scripts to share that connection when they connect with the same credentials. By sharing connections among your scripts, you can save system resources and queries execute faster.

$conn = odbc_pconnect("CData ODBC Workday Source","user","password"); ... odbc_close($conn); //persistent connection must be closed explicitly

Create Prepared Statements

Create prepared statements and parameterized queries with the odbc_prepare function.

$query = odbc_prepare($conn, "SELECT * FROM Workers WHERE Legal_Name_Last_Name = ?");

Execute Queries

Execute prepared statements with odbc_execute.

$conn = odbc_connect("CData ODBC Workday Source","user","password"); $query = odbc_prepare($conn, "SELECT * FROM Workers WHERE Legal_Name_Last_Name = ?"); $success = odbc_execute($query, array('Morgan'));

Execute nonparameterized queries with odbc_exec.

$conn = odbc_connect("CData ODBC Workday Source","user","password"); $query = odbc_exec($conn, "SELECT Worker_Reference_WID, Legal_Name_Last_Name FROM Workers WHERE Legal_Name_Last_Name = 'Morgan'");

Process Results

Access a row in the result set as an array with the odbc_fetch_array function.

$conn = odbc_connect("CData ODBC Workday data Source","user","password"); $query = odbc_exec($conn, "SELECT Worker_Reference_WID, Legal_Name_Last_Name FROM Workers WHERE Legal_Name_Last_Name = 'Morgan'"); while($row = odbc_fetch_array($query)){ echo $row["Worker_Reference_WID"] . "\n"; }

Display the result set in an HTML table with the odbc_result_all function.

$conn = odbc_connect("CData ODBC Workday data Source","user","password"); $query = odbc_prepare($conn, "SELECT * FROM Workers WHERE Legal_Name_Last_Name = ?"); $success = odbc_execute($query, array('Morgan')); if($success) odbc_result_all($query);

More Example Queries

You will find complete information on the SQL queries supported by the driver in the help documentation. The code examples above are Workday-specific adaptations of the PHP community documentation for all ODBC functions.