Integrate Cline with Live Paylocity Data via CData Connect AI

Cline is an autonomous AI coding agent that runs inside modern IDEs such as VS Code and Cursor. It enables developers to build agent-driven workflows that can reason through tasks, execute actions, and interact with external systems directly from the editor using a structured execution model.

By integrating Cline with CData Connect AI through the built-in MCP (Model Context Protocol) Server, the agent gains the ability to query, analyze, and act on live Paylocity data in real time. This integration bridges Cline's in-IDE agent framework with the governed enterprise connectivity of CData Connect AI, ensuring all data access runs securely against authorized sources without manual data movement.

This article outlines the steps to configure Paylocity connectivity in Connect AI, generate the required personal access token, register the Connect AI MCP Server in Cline, and verify that the agent can successfully interact with live Paylocity data from within the IDE.

Step 1: Configure Paylocity connectivity for Cline

Connectivity to Paylocity from Cline is made possible through CData Connect AI's Remote MCP Server. To interact with Paylocity data from Cline, start by creating and configuring a Paylocity connection in CData Connect AI.

1. Log into Connect AI, click Sources, and then click Add Connection

2. Select Paylocity from the Add Connection panel

3. Enter the necessary authentication properties to connect to Paylocity.

   Set the following to establish a connection to Paylocity:

   • RSAPublicKey: Set this to the RSA Key associated with your Paylocity, if the RSA Encryption is enabled in the Paylocity account.

     This property is required for executing Insert and Update statements, and it is not required if the feature is disabled.

   • UseSandbox: Set to true if you are using sandbox account.
   • CustomFieldsCategory: Set this to the Customfields category. This is required when IncludeCustomFields is set to true. The default value for this property is PayrollAndHR.
   • Key: The AES symmetric key(base 64 encoded) encrypted with the Paylocity Public Key. It is the key used to encrypt the content.

     Paylocity will decrypt the AES key using RSA decryption.
     It is an optional property if the IV value not provided, The driver will generate a key internally.

   • IV: The AES IV (base 64 encoded) used when encrypting the content. It is an optional property if the Key value not provided, The driver will generate an IV internally.

   Connect Using OAuth Authentication

   You must use OAuth to authenticate with Paylocity. OAuth requires the authenticating user to interact with Paylocity using the browser. For more information, refer to the OAuth section in the Help documentation.

   The Pay Entry API

   The Pay Entry API is completely separate from the rest of the Paylocity API. It uses a separate Client ID and Secret, and must be explicitly requested from Paylocity for access to be granted for an account. The Pay Entry API allows you to automatically submit payroll information for individual employees, and little else. Due to the extremely limited nature of what is offered by the Pay Entry API, we have elected not to give it a separate schema, but it may be enabled via the UsePayEntryAPI connection property.

   Please be aware that when setting UsePayEntryAPI to true, you may only use the CreatePayEntryImportBatch & MergePayEntryImportBatchgtable stored procedures, the InputTimeEntry table, and the OAuth stored procedures. Attempts to use other features of the product will result in an error. You must also store your OAuthAccessToken separately, which often means setting a different OAuthSettingsLocation when using this connection property.

4. Click Save & Test
5. Navigate to the Permissions tab and update user-based permissions

Add a Personal Access Token

A Personal Access Token (PAT) is used to authenticate the connection to Connect AI from Cline. It is best practice to create a separate PAT for each integration to maintain granular access control.

1. Click the gear icon () at the top right of the Connect AI app to open Settings
2. On the Settings page, go to the Access Tokens section and click Create PAT
3. Give the PAT a descriptive name and click Create

4. Copy the token when displayed and store it securely. It will not be shown again

With the Paylocity connection configured and a PAT generated, Cline can now connect to Paylocity data through the CData Connect Ai.

Step 2: Install and set up Cline

Cline is distributed as an IDE extension and can be installed in environments such as VS Code or Cursor. In this example, Cursor is used, but the steps are identical for supported IDEs.

1. Open Cursor and install the Cline extension from the Extensions Marketplace
2. Complete the initial Cline setup flow, including model selection and permission prompts
3. After setup is complete, the Cline agent panel opens automatically inside the IDE

Step 3: Add the Connect AI Remote MCP Server

Once Cline is running, add the CData Connect AI Remote MCP Server so the agent can access live Paylocity data through Connect AI.

1. In the Cline panel, click MCP Servers
2. Open Remote Servers and click Edit Configuration
3. This opens a JSON configuration file. Paste the configuration below

   {
     "mcpServers": {
       "mcp": {
         "url": "https://mcp.cloud.cdata.com/mcp",
         "type": "streamableHttp",
         "headers": {
           "Authorization": "Basic your_email:your_PAT"
         },
         "disabled": false,
         "autoApprove": []
       }
     }
   }
   

   Note: Cline will use Basic authentication with Connect AI. Combine your Connect AI user email and the PAT you created earlier. For example, [email protected]:ABC123...XYZ789 and add the value for the Authorization header like, Basic [email protected]:ABC123...XYZ789.

   
4. Save the file and return to the MCP Servers screen to confirm the server is listed and enabled

Step 4: Query live data from Cline

With the MCP server registered, Cline can now interact with live data sources exposed by Connect AI.

1. Click the icon in the Cline panel to start a New Task/Chat
2. At the bottom of the chat window, confirm that the configured MCP server is selected
3. Start interacting with the agent by entering prompts such as:
   • List connections
   • Show schemas for a catalog
   • Query recent records from Paylocity data
   

Cline is now fully configured to access and query live Paylocity data through the CData Connect AI Remote MCP Server, enabling real-time, data-driven workflows directly from your IDE.

Get CData Connect AI

To access 300+ SaaS, Big Data, and NoSQL sources through secure, AI-ready interfaces, try CData Connect AI today.