Getting Started with the CData PowerShell Cmdlets for Amazon Athena Data

This guide explains everything you need to get started with the Amazon Athena PowerShell Cmdlets. You'll learn how to install the cmdlets, configure your first connection, run queries, and explore next steps for working with Amazon Athena data in PowerShell.

Getting Started

---

Installation & Licensing

System Requirements

CData PowerShell Cmdlets run anywhere PowerShell runs.

Windows

• Windows 10/11
• Windows Server 2016+
• PowerShell 5.1 or PowerShell 7+

macOS & Linux

• PowerShell 7+
• No additional system libraries required
• No architecture-specific installers

Installing the Cmdlets

CData Cmdlets are delivered through the PowerShell Gallery, ensuring a simple and consistent installation process across platforms.

Installation Steps

1. Open PowerShell in Administrator mode
2. Run the following command to install the cmdlet module:

   Install-Module AmazonAthenaCmdlets -Repository PSGallery -Force

   This command:

   • Downloads the module from the official PowerShell Gallery
   • Installs it into your PowerShell environment
   • Registers all cmdlets for immediate use

Module Verification

To verify installation:

Get-Module -ListAvailable "*AmazonAthena*"

Licensing

The cmdlets support both trial and fully licensed activation.

Trial Licensing

Trial activation is automatic - no key is required. Once installed, you can begin using the cmdlets immediately.

Activating a Full License

If you have purchased a full license, you will receive a product key from the CData Orders Team.

Activate Your License

Run the following command:

Set-ModuleLicense ""

You should see a confirmation message indicating successful activation.

Common Licensing Questions

Can I use my license on multiple machines?

Depending on your subscription tier. Refer to your order confirmation or contact [email protected].

I lost my license key. What do I do?

Email [email protected] with your order number to have it resent.

Can I transfer my license to another machine?

Submit a license transfer request here: https://www.cdata.com/lic/transfer/.

Where can I manage my license?

Visit the CData Customer Portal: https://portal.cdata.com/.

Connection Configuration

Once the module is installed and licensed, you can establish a connection to Amazon Athena using the

Connect-Amazon Athena cmdlet

After obtaining the needed connection properties, accessing Amazon Athena data in PowerShell and preparing for replication consists of four basic steps.

Authenticating to Amazon Athena

To authorize Amazon Athena requests, provide the credentials for an administrator account or for an IAM user with custom permissions: Set AccessKey to the access key Id. Set SecretKey to the secret access key.

Note: Though you can connect as the AWS account administrator, it is recommended to use IAM user credentials to access AWS services.

Obtaining the Access Key

To obtain the credentials for an IAM user, follow the steps below:

1. Sign into the IAM console.
2. In the navigation pane, select Users.
3. To create or manage the access keys for a user, select the user and then select the Security Credentials tab.

To obtain the credentials for your AWS root account, follow the steps below:

1. Sign into the AWS Management console with the credentials for your root account.
2. Select your account name or number and select My Security Credentials in the menu that is displayed.
3. Click Continue to Security Credentials and expand the Access Keys section to manage or create root account access keys.

Authenticating from an EC2 Instance

If you are using the CData Data Provider for Amazon Athena 2018 from an EC2 Instance and have an IAM Role assigned to the instance, you can use the IAM Role to authenticate. To do so, set UseEC2Roles to true and leave AccessKey and SecretKey empty. The CData Data Provider for Amazon Athena 2018 will automatically obtain your IAM Role credentials and authenticate with them.

Authenticating as an AWS Role

In many situations it may be preferable to use an IAM role for authentication instead of the direct security credentials of an AWS root user. An AWS role may be used instead by specifying the RoleARN. This will cause the CData Data Provider for Amazon Athena 2018 to attempt to retrieve credentials for the specified role. If you are connecting to AWS (instead of already being connected such as on an EC2 instance), you must additionally specify the AccessKey and SecretKey of an IAM user to assume the role for. Roles may not be used when specifying the AccessKey and SecretKey of an AWS root user.

Authenticating with MFA

For users and roles that require Multi-factor Authentication, specify the MFASerialNumber and MFAToken connection properties. This will cause the CData Data Provider for Amazon Athena 2018 to submit the MFA credentials in a request to retrieve temporary authentication credentials. Note that the duration of the temporary credentials may be controlled via the TemporaryTokenDuration (default 3600 seconds).

Connecting to Amazon Athena

In addition to the AccessKey and SecretKey properties, specify Database, S3StagingDirectory and Region. Set Region to the region where your Amazon Athena data is hosted. Set S3StagingDirectory to a folder in S3 where you would like to store the results of queries.

If Database is not set in the connection, the data provider connects to the default database set in Amazon Athena.

Collecting Amazon Athena Data

1. Install the module:

   Install-Module AmazonAthenaCmdlets

2. Connect to Amazon Athena:

     $amazonathena = Connect-AmazonAthena  -AWSAccessKey $AWSAccessKey -AWSSecretKey $AWSSecretKey -AWSRegion $AWSRegion -Database $Database -S3StagingDirectory $S3StagingDirectory
     

Querying Amazon Athena Data in PowerShell

Once connected, you can query data using standard SQL like commands.

Example Query:

$results = Select-AmazonAthena `
    -Connection $conn `
    -Table "Customers" `
    -Columns "Name,TotalDue" `
    -Where "Name != ''"

Display the results:

$results

You have now successfully accessed Amazon Athena data from PowerShell!

Common Issues

Authentication Failed

Solution: Verify username, password, and security token. For OAuth applications, you may need to authorize CData in your application's security settings. Contact [email protected] for authorization assistance.

Network or Proxy Issues

Solution: Confirm firewall settings and outbound access. Most cloud applications use port 443.

Cmdlet Not Found

Solution: Ensure the module is installed-

Get-Module -ListAvailable "*Amazon Athena*"

Slow Queries

Solution:

• Add filters to reduce dataset size
• Use $Limit or $Top properties where supported
• Contact [email protected] for optimization help

For additional connection troubleshooting, contact [email protected] with your specific error message.

What's Next?

Now that you have installed, licensed, and configured the PowerShell Cmdlets, here are some scenarios you can use to explore:

Get Support

If you need assistance:

• Technical Support: [email protected]
• Community Forum: CData Community Site
• Help Documentation: Installed locally and available online

FAQs (PowerShell Cmdlets)

Installation & Licensing

• Do I need administrator rights to install the cmdlets?

Not always.

• Windows PowerShell 5.1 (Windows): Administrator rights are recommended, especially when installing modules for all users.
• PowerShell 7+ (Windows, macOS, Linux): You can install cmdlets for the current user without admin rights using:

  Install-Module AmazonAthenaCmdlets -Scope CurrentUser

• Do I need to download an installer?

CData PowerShell Cmdlets are delivered through the PowerShell Gallery. Installation is performed via:

Install-Module AmazonAthenaCmdlets -Repository PSGallery -Force

Connecting

• How do I connect to multiple accounts for the same data source?

Create separate connection objects-each with different authentication properties:

$conn1 = Connect-AmazonAthena -User User1 -Password Pwd1

$conn2 = Connect-AmazonAthena -User User2 -Password Pwd2

• Does PowerShell Cmdlets require a DSN?

Cmdlets do not use ODBC DSNs. All connection properties are passed directly in

Connect-Amazon Athena

• Can I connect through a proxy server?

Many cmdlets support proxy properties such as:

• ProxyServer
• ProxyPort
• ProxyUser
• ProxyPassword

Refer to the data-source-specific Help documentation.

Performance & Troubleshooting

• Why are my queries slow?

Common causes:

• Missing filters (e.g., no WHERE clause)
• Pulling large result sets
• Latency from cloud APIs
• Not using incremental strategies

Try:

• Filtering data (-Where parameter)
• Selecting only required columns
• Reviewing API throttling limits for your data source

Contact [email protected] for query optimization assistance.

• How do I enable logging?

Enable module logging with:

Set-ModuleLogging -Path "C:\logs\cdata.log" -Verbosity 3

Upload the log file securely when working with CData Support.
• What ports need to be open?

Most cloud applications (Salesforce, HubSpot, Dynamics, Google APIs, etc.) use: HTTPS (443)

If your source requires additional ports, check its specific documentation or contact [email protected].

• Can I use the cmdlets in containers (Docker, Kubernetes)?

Install PowerShell 7 in the container and install the module:

pwsh -Command "Install-Module AmazonAthenaCmdlets -Force"

Then authenticate normally.

General

• Where can I find all supported SQL/command operations?

Each cmdlet includes a Help documentation set installed locally and available online: https://www.cdata.com/powershell/.

• How often are PowerShell Cmdlets updated?

CData releases major annual updates plus incremental updates throughout the year. Check your customer portal or contact [email protected] for version availability.

• Where can I find code examples?

Every Cmdlet includes examples in the Help documentation, plus online examples for many services: https://www.cdata.com/powershell/. Examples include:

• Basic queries
• Insert/update/delete
• OAuth flows
• File operations
• API integration

For questions not covered in this FAQ, [email protected].