Integrate LibreChat with Live Bitbucket Data via CData Connect AI

LibreChat is an open-source, self-hosted AI chat platform that brings together multiple LLM providers, agents, and assistants behind a single interface. It also supports the Model Context Protocol (MCP), so you can connect external tools and data sources directly to the chat and pull in live data from the systems you already work with.

By integrating LibreChat with CData Connect AI through the built-in MCP Server, LibreChat gains governed, real-time access to live Bitbucket data. This enables you to list catalogs, explore schemas, and query records from Bitbucket data using natural language prompts, with all data access running securely against authorized sources.

This article explains how to configure Bitbucket connectivity in Connect AI, generate the required personal access token, install LibreChat, register the Connect AI MCP Server, configure an LLM provider, and verify the integration by querying live Bitbucket data from the LibreChat interface.

Step 1: Configure Bitbucket connectivity for LibreChat

Connectivity to Bitbucket from LibreChat is made possible through Connect AI's Remote MCP Server. To interact with Bitbucket data from LibreChat, start by creating and configuring a Bitbucket connection in Connect AI.

1. Log into Connect AI, click Sources, and then click Add Connection

2. Select Bitbucket from the Add Connection panel

3. Enter the necessary authentication properties to connect to Bitbucket.

   For most queries, you must set the Workspace. The only exception to this is the Workspaces table, which does not require this property to be set, as querying it provides a list of workspace slugs that can be used to set Workspace. To query this table, you must set Schema to 'Information' and execute the query SELECT * FROM Workspaces>.

   Setting Schema to 'Information' displays general information. To connect to Bitbucket, set these parameters:

   • Schema: To show general information about a workspace, such as its users, repositories, and projects, set this to Information. Otherwise, set this to the schema of the repository or project you are querying. To get a full set of available schemas, query the sys_schemas table.
   • Workspace: Required if you are not querying the Workspaces table. This property is not required for querying the Workspaces table, as that query only returns a list of workspace slugs that can be used to set Workspace.

   Authenticating to Bitbucket

   Bitbucket supports OAuth authentication only. To enable this authentication from all OAuth flows, you must create a custom OAuth application, and set AuthScheme to OAuth.

   Be sure to review the Help documentation for the required connection properties for you specific authentication needs (desktop applications, web applications, and headless machines).

   Creating a custom OAuth application

   From your Bitbucket account:

   1. Go to Settings (the gear icon) and select Workspace Settings.
   2. In the Apps and Features section, select OAuth Consumers.
   3. Click Add Consumer.
   4. Enter a name and description for your custom application.
   5. Set the callback URL:
      • For desktop applications and headless machines, use http://localhost:33333 or another port number of your choice. The URI you set here becomes the CallbackURL property.
      • For web applications, set the callback URL to a trusted redirect URL. This URL is the web location the user returns to with the token that verifies that your application has been granted access.
   6. If you plan to use client credentials to authenticate, you must select This is a private consumer. In the driver, you must set AuthScheme to client.
   7. Select which permissions to give your OAuth application. These determine what data you can read and write with it.
   8. To save the new custom application, click Save.
   9. After the application has been saved, you can select it to view its settings. The application's Key and Secret are displayed. Record these for future use. You will use the Key to set the OAuthClientId and the Secret to set the OAuthClientSecret.
   
4. Click Save & Test
5. Navigate to the Permissions tab and update user-based permissions

Add a Personal Access Token

A Personal Access Token (PAT) is used to authenticate the connection to Connect AI from LibreChat. It is best practice to create a separate PAT for each integration to maintain granular access control.

1. Click the gear icon () at the top right of the Connect AI app to open Settings
2. On the Settings page, go to the Access Tokens section and click Create PAT
3. Give the PAT a descriptive name and click Create

4. Copy the token when displayed and store it securely. It will not be shown again

With the Bitbucket connection configured and a PAT generated, LibreChat can now connect to Bitbucket data through Connect AI.

Step 2: Install LibreChat and configure Connect AI MCP

Next, install LibreChat locally and configure the Connect AI Remote MCP Server so that the chat interface can discover and call live data tools through Connect AI.

1. Install LibreChat by following the official installation guide. If you are using the npm setup, make sure MongoDB and MeiliSearch are installed and running locally
2. Once the installation is complete, start LibreChat and open http://localhost:3080/ in your browser to access the chat interface
3. In the left navigation bar, click the MCP Settings icon, then click Add MCP
4. In the Add MCP panel, configure the server with the following values:
   • Name: CData MCP, or any name of your choice
   • Description: Optional description for the server
   • MCP Server URL: https://mcp.cloud.cdata.com/mcp
   • Transport: Streamable HTTPS
   • Authentication: API Key
   • Header Format: Basic
   • API Key: base64-encoded value of email:PAT

   Note: LibreChat will use Basic authentication with Connect AI. Combine your Connect AI user email and the PAT you created earlier in the format email:PAT, then base64 encode the combined string and paste it in the API Key field. For example, [email protected]:ABC123...XYZ789 base64-encoded becomes something like: dXNlckBkb21haW4uY29tOkFCQzEyMy4uLlhZWjc4OQ==

   
5. Check I trust this application and click Add to save the server
6. The CData MCP server now appears in the left navigation bar. Click the connect icon next to it to establish the connection to Connect AI

Enable the MCP server and configure an LLM provider

LibreChat requires at least one LLM provider to power the chat. Enable the MCP server in the chat input and add an API key for your preferred provider so the model can interpret prompts and call MCP tools through Connect AI.

1. In the chat interface, click the MCP selector at the bottom of the input box and confirm that CData MCP is checked so the tools are exposed to the chat
2. At the top of the chat, click the model selector and choose your preferred LLM provider (e.g., OpenAI, Anthropic, Google) and model
3. Click Set API Key next to the chosen provider, paste your provider API key, and click Submit

With the MCP server and an LLM provider configured, LibreChat is ready to query live Bitbucket data through Connect AI.

Step 3: Query live Bitbucket data from LibreChat

With the integration complete, use the LibreChat chat input to interact with live Bitbucket data through natural language prompts handled by the configured LLM.

1. With the CData MCP server enabled and a model selected, type a prompt in the chat input, for example:
   • List all catalogs in my cdata mcp
   • Show the available schemas and tables for Bitbucket
   • Query the top 5 records from a table in Bitbucket data
2. LibreChat calls the Connect AI MCP Server and returns live results from Bitbucket data

At this point, your LibreChat instance communicates with the Connect AI MCP Server and retrieves live Bitbucket data through remote MCP tools directly from the chat interface.

Get CData Connect AI

To access hundreds of SaaS, Big Data, and NoSQL sources directly from your cloud applications, try CData Connect AI today! Download a free 14-day trial, and as always, our world-class Support Team is available to assist you with any questions you may have.