Replicate Paylocity Data for Use in Salesforce Connect

Ready to get started?

Learn more or sign up for a free trial:

CData Sync



Replicate Paylocity data to a PostgreSQL database on Heroku and connect it to Salesforce using Salesforce Connect.

CData Sync is a stand-alone application that provides solutions for a variety of replication scenarios, such as replicating sandbox and production instances into your database. By replicating Paylocity data to a PostgreSQL database in Heroku, you gain access to Paylocity external objects (using Salesforce Connect) alongside standard Salesforce objects.

Requirements

For this replication example, you need the following:

  1. CData Sync (trial or licensed), along with a license (full or trial) for Paylocity replication.
  2. A Heroku app with the Heroku Postgress and Heroku Connect add-ons provisioned.
  3. A Salesforce account.

Configure the Replication Destination

Using CData Sync, you can easily replicate Paylocity data to a PostgreSQL database on Heroku. For this article, you need an existing PostgreSQL database on Heroku. To add your PostgreSQL database as a replication destination, navigate to the Connections tab.

  1. Click Add Connection.
  2. Select PostgreSQL as the destination and enter the necessary connection properties.

    To connect to PostgreSQL, set the Host, Port (the default port is 5432) and Database connection properties, then set the user and password you wish to use to authenticate to the server. If the Database property is not specified, the data provider connects to the user's default database.

  3. Click Test Connection to ensure the connection is configured properly.
  4. Click Save Changes.

Configure the Paylocity Connection

You can configure a connection to Paylocity from the Connections tab. To add a connection your Paylocity data, navigate to the Connections tab.

  1. Click Add Connection.
  2. Select a source (Paylocity).
  3. Configure the connection properties.

    Set the following to establish a connection to Paylocity:

    • RSAPublicKey: Set this to the RSA Key associated with your Paylocity, if the RSA Encryption is enabled in the Paylocity account.

      This property is required for executing Insert and Update statements, and it is not required if the feature is disabled.

    • UseSandbox: Set to true if you are using sandbox account.
    • CustomFieldsCategory: Set this to the Customfields category. This is required when IncludeCustomFields is set to true. The default value for this property is PayrollAndHR.
    • Key: The AES symmetric key(base 64 encoded) encrypted with the Paylocity Public Key. It is the key used to encrypt the content.

      Paylocity will decrypt the AES key using RSA decryption.
      It is an optional property if the IV value not provided, The driver will generate a key internally.

    • IV: The AES IV (base 64 encoded) used when encrypting the content. It is an optional property if the Key value not provided, The driver will generate an IV internally.

    Connect Using OAuth Authentication

    You must use OAuth to authenticate with Paylocity. OAuth requires the authenticating user to interact with Paylocity using the browser. For more information, refer to the OAuth section in the Help documentation.

    The Pay Entry API

    The Pay Entry API is completely separate from the rest of the Paylocity API. It uses a separate Client ID and Secret, and must be explicitly requested from Paylocity for access to be granted for an account. The Pay Entry API allows you to automatically submit payroll information for individual employees, and little else. Due to the extremely limited nature of what is offered by the Pay Entry API, we have elected not to give it a separate schema, but it may be enabled via the UsePayEntryAPI connection property.

    Please be aware that when setting UsePayEntryAPI to true, you may only use the CreatePayEntryImportBatch & MergePayEntryImportBatchgtable stored procedures, the InputTimeEntry table, and the OAuth stored procedures. Attempts to use other features of the product will result in an error. You must also store your OAuthAccessToken separately, which often means setting a different OAuthSettingsLocation when using this connection property.

  4. Click Connect to ensure that the connection is configured properly.
  5. Click Save Changes.

Configure Queries for Each Paylocity Instance

CData Sync enables you to control replication with a point-and-click interface. To configure a replication, navigate to the Jobs tab and click Add Job. Select the Source and Destination for your replication.

Replicate Entire Tables

To replicate an entire table, click Add Tables in the Tables section, choose the table(s) you wish to replicate, and click Add Selected Tables.

Customize Your Replication

You can use the Transform feature to customize your replication, whether you want to only replicate specific fields, compute new fields based on existing fields, and/or filter the results based on specific conditions:

  • Add or remove fields using the check boxes
  • Add computed fields to the bottom of the column listing
  • Add filters using the Filter section

As you make changes using the interface, the SQL query used for the replication changes, going from something simple, like this:

REPLICATE [Employee]

to something customized and more complex, like this:

REPLICATE [Employee] SELECT [FirstName], [LastName] FROM [Employee] WHERE [EmployeeId] = 1234

Schedule Your Replication

In the Schedule section, you can schedule a job to run automatically, configuring the job to run after specified intervals, ranging from once every 10 minutes to once every month.

Once you configure the replication job, click Save Changes. You can configure any number of jobs to replicate Paylocity data for use as external objects in Salesforce.

Connect to Your Replicated Paylocity Data as an External Data Source

Once your Paylocity data is replicated to the PostgreSQL database on Heroku, configure the OData interface for Heroku and connect to the database as an external data source via Salesforce Connect.

Configure the OData Service for Heroku

The first part of connecting to Paylocity data replicated to a PostgreSQL database on Heroku is configuring the Heroku External Objects for the database.

  1. In your Heroku dashboard, click the Heroku Connect Add-On.
  2. Select External Objects. (If this is the first time using Heroku External Object, you will be prompted to create the OData service's login credentials)
  3. View the OData service URL and credentials (noting the URL and credentials to be used later from Salesforce Connect).
  4. In Data Sources, select which replicated tables to share.

Refer to the Heroku documentation for more detailed instructions.

Configure an External Data Source in Salesforce

After the OData service for Heroku is configured, we can connect to the replicated Paylocity data as an external data source from Salesforce Connect.

  1. In Salesforce, click Setup
  2. In the Administration section, click Data -> External Data Sources
  3. Set the data source parameter properties:
    • External Data Source: the name you wish to display in the Salesforce user interface
    • Name: a unique identifier for the API
    • Type: Salesforce Connect: OData 4.0
    • URL: Enter the OData endpoint from Heroku Connect (above)
    • Format: JSON
  4. Set Authentication:
    • Identity Type: Named Principal
    • Authentication Protocol: Password Authentication
    • Username: the Heroku Connect username
    • Password: the Heroku Connect password
  5. Click Save.

Synchronize Paylocity Objects

After you have created the external data source in Salesforce, follow the steps below to create Paylocity external objects that reflect any changes in the data source. You will synchronize the definitions for the Paylocity external objects with the definitions for Paylocity tables.

  1. Click the link for the external data source you created.
  2. Click Validate and Sync.
  3. Select the Paylocity tables you want to work with as external objects and click Sync.

Access Paylocity Data as Salesforce Objects

At this point, you will be able to connect to and work with your replicated Paylocity entities as external objects just as you would with standard Salesforce objects, whether you are simply viewing the data or building related lists of external Paylocity data alongside standard Salesforce objects.

Download a 30-day free trial of CData Sync and replicate your Paylocity data for use with Salesforce Connect today!